



| Product price | 3,260৳ |
| Special price | 2,390৳ |
| Stock Status | In Stock |
| Manufactured By | Netis |
| Product model | P106C |
| Warranty | 1 Year |
Cash Discount Price
Pay with Bkash, Nagad, Online Payment or Cash
EMI Price
Total EMI Price: 2,428৳
We accept 21 Banks EMI to buy this product.
Netis P106C 4POE+2RJ45 100M Standard POE Switch
The Netis P106C is a 100M standard POE switch that provides 6*10/100M adaptive RJ45 ports. Ports 1~4 feature POE power supply capability and can be used as Power over Ethernet devices. The power supply port can automatically detect and recognize the powered device that complies with the IEEE 802.3af/at standard and supply power through the network cable.It supports two modes: normal switch mode and 250M ultra-long transmission. P106C makes it easier for you to deploy wireless access point (AP) and IP terminal network devices using POE technology.
Hardware | |
Interface | 4*10/100Mbps POE ports (Data/Power) 2*10/100M uplink RJ45 ports (Data) |
Basic function | Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme |
Standards | IEEE 802.3 10BASE-T Ethernet IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet |
Mode | Normal switch mode/Extend mode |
Data Transfer Rate | Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex) Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex) |
Store & Forwarding | Yes |
Switching Capacity | 1.2G |
MAC Address Table Size | 2K |
Jumbo Frame | 2048 byte |
Environment | Operation Temperature:0℃~40℃ Storage Temperature:-40℃~70℃ Operation Humidity:10%~90% RH Non-condensing Storage Humidity: 5%–90% RH Non-condensing |
Power Input POE Standards | Single-port maximum power: 30W, Whole switch maximum power: 60W Max Support over-current,over-voltage and short-circuit protection Support the soft start of high-power PD Support sequential boot-up Power Supply Pin: 12+/36- 100-240V, 1.5A Max (Input) 52V, 1.15A Max (Output) |
Cabling type | 100Base-TX: Cat 5e or better UTP/STP (≤100m) 10Base-TX: Cat 5e or better UTP/STP (≤250 m) |
Dimensions (L x W x H ) | 125mm*115mm*34mm |




